A washing machine is an indispensable appliance in most households. It saves us time and energy in doing laundry, and its convenience can’t be denied. However, a washing machine that’s making a lot of noise can be a source of annoyance and even worry. If you’re experiencing a noisy washing machine, don’t stress out, we will walk you through what could be causing the problem and what you can do to fix it.
Troubleshooting Tips for a Noisy Washing Machine
The constant use of a washing machine can lead to wear and tear, which can lead to an issue where your washing machine makes loud noise. If you’re hearing loud banging or grinding noises when using your washing machine, it’s worth looking into because it can also indicate a potential issue that needs fixing before it gets worse.
Reasons Why Your Washer Is Making Noise
There are several reasons why a washing machine could be making loud noises:
Unbalanced Load – One of the most common reasons for a noisy washing machine is an unbalanced load. If the load inside the machine is not distributed evenly, if there are too many heavy items, or if it’s overfilled the machine will vibrate and make a lot of noise during the spin cycle.
Worn Out Parts – Over time, parts inside the washing machine can wear out and become loose, leading to excessive noise during operation. If your washer isn’t starting or having serious problems there is likely a part failure.
Damaged Drum Bearings – Wondering “why is my washing machine making a banging noise when spinning”? If the bearings that support the washing machine’s drum are damaged or worn out, the machine will make a loud, rumbling noise during the spin cycle.
Loose or Damaged Drive Belt – If the drive belt that connects the motor to the drum is loose or damaged, it’s likely that you’ll find the washing machine very noisy when spinning.
Clogged Drain Pump – If you’re wondering why your washing machine makes loud noise when draining, it may be the drain pump. If the drain pump is clogged or damaged, it will not be able to remove water from the machine properly, leading to a loud noise during the drain cycle. This is also a likely reason if your washer smells bad.
Solutions for a Noisy Washer
Now that you know the common problems, let’s look into the solutions for each of these problems and help you get your noisy washing machine quiet again.
Level the Machine – Make sure the machine is level by adjusting the feet. If it’s not level, it can cause the machine to vibrate excessively.
Load Distribution – Make sure the load inside the machine is distributed evenly. If you’re washing a large item like a comforter, add a few towels to help balance the load. Make sure not to overfill the washer to give items room to move around.
Tighten Loose Parts – Check for any loose parts inside the machine and tighten them. If a part is damaged, replace it. If you’re not experienced with appliance repairs, you may want to wait for a technician.
Replace Drum Bearings – If the drum bearings are damaged, you’ll need to replace them. This is a more complicated repair and will require a professional’s assistance.
Replace Drive Belt – If the drive belt is loose or damaged, you’ll need to replace it. This is another issue that may require professional assistance because you will need to open the washer up and get into its internal parts.
Clean the Drain Pump – If the drain pump is clogged, clean it out to restore proper water flow. This is typically located near the base of the washer behind a small panel. You can usually pull out the filter by twisting it left and then removing any debris.
A noisy washing machine can be a frustrating problem to have, but it’s usually something that can be fixed without too much trouble. By following the solutions above, you can restore your washing machine to its quiet and efficient operation. If you’re unsure about any repairs or feel uncomfortable making them yourself, don’t hesitate to contact the professional washer repair team at Sharper Service Solutions.